Thread: New Product Spektrum DX8 & DX10
View Single Post
Old Dec 31, 2012, 12:39 PM
aerocal is offline
Find More Posts by aerocal
Registered User
Central California
Joined Dec 2006
3,311 Posts
Quote:
Originally Posted by emodell View Post
Hello,
I have exchanged a AR9000 (DSM2) receiver against an AR9010 each with 2 satellites in a F3B model. All servos are connected to the same ports.
1. After turning on the DX10t (Aireware 1.04C) the flaps reacted in the opposite direction until it stops mechanical!
2. The ailerons functioned properly, but the size of the movement up and down are opposite!
When I returned the receiver swap, everything is ok again.
Why is that? Have the receiver an error?
Are you saying that the channels are acting differently from simply swapping the Rx? Im not aware of an AR9010.Do you mean AR9020?

Quote:
Originally Posted by emodell View Post
I want to put 2 SPM9645 DSMX satellites on a 4 pin connector. (2 satellites in a wing). What colors are "plus" and "minus"? What color is the data line? Can I contact them together with a second satellite? Which cable can I get together in contact ?
Many thanks for help!
You can only attach one remote per remote port on the Rx.They cannot be y-connected to have 2 remotes using the same port on the Rx.One remote on one lead into a single port on the Rx is how it is designed to work.
aerocal is offline Find More Posts by aerocal
Reply With Quote