Originally Posted by JeffT
Thanks for the tip. I'll try to get some better blades than the abs ones.
Today, I've been experimenting a bit with the throttle and pitch curves.
I have tried the throttle settings I use on my CopterX 450, but it's too agressive for the X3. I reverted to the factory settings for the throttle. This is what gives best results.
For the pitch I found there was way too much negative at 0 throttle (normal hover mode, not idle up), so I've modified a bit this and adjusted by a few % the rest of the curve. I think the heli is more pleasant to fly now.
Too bad, the weather here makes it impossible to fly outside these days
After playing around with pitch and throttle curves as well as CaptJac's modified curves I also decided that at this stage of my learning curve stock is best for both, although I did change D/R and EXP values as well as gyro and agility settings on the RX.
What did you adjust the normal mode pitch curve %'s to?