Thread: Discussion Not another one...
View Single Post
Old Dec 30, 2012, 02:44 PM
mredzadventure is offline
Find More Posts by mredzadventure
Kowalski !.....Options
mredzadventure's Avatar
USA, MI, Hastings
Joined Jan 2007
2,463 Posts
There should be an o ring on the bottom of the carb and the carb assembly should have a few seals on the high speed and the slide part of the carb. It should prime with out the throttle being opened. For giggles and laughs change the fuel line. I wonder if the carb is bad? What is the brand of the engine and brand of fuel are you using. Maybe the needle on the high speed setting is bad give the carb a good cleaning with carb cleaner or some kind of mild solvent. Also check the seal on the fuel tank cap make sure it is not leaking you need a good seal to get the fuel to get to the carb.

With it back at the factory settings put some fuel in the cylinder and see if it will fire. What brand of glow plugs are you using?
mredzadventure is offline Find More Posts by mredzadventure
Reply With Quote