Thread: Discussion Mosquito'sin formation!!
View Single Post
Old Dec 30, 2012, 01:47 PM
Doug Bartley is offline
Find More Posts by Doug Bartley
Registered User
Doug Bartley's Avatar
Canada, ON, Owen Sound
Joined Oct 2008
3,354 Posts
I succeeded in getting the control linkages installed and servos hooked up in the fuselage.
The split connection to the rudder/ tailwheel steering came out really nice, allowing one servo to do both. Both rudder/ steering and elevator servos are Bluebird BMS 706MG at 75oz torque. The retract servo for tailwheel is a JR NES 507 at 42oz. All are run from 6v.
One pic shows the antenna/ latch installed on the hatch. The Turnigy 8-15 Bec will be installed up against the #1 former, a 2s/1800/ 20c will supply the RX. Rx will go under the wingtube, with short leads to connect.
I made up up 3 hd Y connectors, now I find I need one with 3, a triple Y for the gear channel. Aux 3 will be used for the bombay doors.
Its going to get pretty crowded in there!!! Doug B
Doug Bartley is offline Find More Posts by Doug Bartley
Reply With Quote