Spare parts for Syma X1 are available from a handful of sources. These includes SymaToyStore, RC-Fever, Feala, Banggood, ThinkRC, SymaHelicopter, RCHelicopter7, Toys-Model, and RCHelicopterbox. Prices and Shipping Cost varies. I do not work for any of these companies. For your convenience, you could click on the links or pictures below to order from one of the low price leaders.
X1-01: Spaceship Canopy
X1-02: Bumble Bee Canopy
X1-03: UFO Canopy
(Specify the direction of rotation)
X1-06: Main Frame
X1-07: Battery Cage
X1-08: Motor Mount
X1-09(Blk): Gear Housing Black (Rear)
X1-09(Wht): Gear Housing White (Front)
X1-10: Carbon Fiber Arm
X1-11: Main Gear
X1-12: Function Control Board
X1-13: 350mAh Li-Po Battery 3.7v
X1-14-15: Spare Motors
(Specify the wire colors for spin direction)
* Members who have purchased these reported that the pinions were not included with the replacement motors.
Apparently, the new motors are now shipped with pinions on them.
X1-16: Rotor to Shaft Connector
X1-17: 2.4GHz Transmitter
X1-18: USB Charging Cable
I believe that these optional parts would work well with the SYMA X1. Some, I have not tried them myself.
LED Light Bars (with plugs)
LED Light Bars (without plugs)
LED light Kit
includes 2 Red, 2 Cascading. US Seller.
Individual LED lights
LED Light Rings.
, 145mm (See Richos' post
5X Tigers 600mAh 15C Lipo
(No OCP, must use optional charger)
Optional AC Wall Charger* for 1S Lipo with JST plug
* Has basic OCP, will work with Lipos that has no OCP, such as Tigers and Nano Tech. Also available from US Warehouse.
IMAX B6 Balance Charger
AC100-240v 60W DC15v 4A Power Supply (US Warehouse)
80W 6A Battery Balance Charger with built-in AC PSU
80W B6AC Balance Charger
JST Parallel Charging Cable
If the above is out of stock (which happens a lot), you can check this alternate source
. It's a bit more expensive, but they have everything!
Turnigy Nano Tech 600mAh 1S 3.7v Lipo
Turnigy Nano Tech 600mAh 1S 3.7v Lipo (USA Warehouse)
Turnigy Nano-Tech 300mAh 1S 45C High Discharge Lipo (mCPx plug), NOT JST!
Check US Warehouse
Turnigy Nano-Tech 300mAh 1S 45C High Discharge Lipo (Solo Pro 100), NOT JST!
And they have reversed polarities to the other LOSI applications. Do be careful and check the polarities first!
Check US Warehouse
WL Toys V949 Radio
. Compatible with X1, better range.
WL Toys V959 Tx.
More direct access buttons.
Double Horse 9117 Programmable radio.
Turnigy 9x Radio with Module, Mode 2
(Ready to bind with X1)
Same as Turnigy 9x. But the antenna is removable with the plug-in module, makes it easy to swap modules. This is currently the best radio I recommend for the Syma X1, and many other RC model. If you're interested in ordering this, and perhaps get a better price, PM me with your Email address.
Hakko Adjustable Heat Soldering Station with Precision Tips (110v US plug)
Also available in: AU Plug 230v