Originally Posted by gchrisgo34
what type of glue did you use to glue the wooden frames inside the fueselage? and what type of glue do you use to glue wood to wood? i dont have a lot of balsa & composite building experience. i was thinking of using wood glue for wood to wood glueing, and epoxy, for wood to fiberglass. thanks. cant wait to see you maiden.
I used hysol glue for everything, but if cost is a problem for you then use epoxy.
Use 30min epoxy for wood to wood, as for wood to glass (like the bulkheads or gear sub-assy) I would glue using a mix of resin and micro balloon (tip: use a syringe to apply the mix for better control).
BTW, prior to gluing wood to composite, rough area with sand paper and clean with alcohol, it's very important.
I hope this will help you.