View Single Post
Old Dec 28, 2012, 06:10 PM
cyclops2 is offline
Find More Posts by cyclops2
Registered User
United States, NJ, Frenchtown
Joined Mar 2003
9,687 Posts
The cheapest L G set by GWS all have a simple locking mechanism. No kick back force to the servo.

Decent gear has that feature.

Hook up a standard sized servo . I would test it with a weaker one. Rather ruin a servo.... than brake the wing spars.

I think the overkill is a typo error..

Did you notice the >>>>>>>>>>>>Do not use 6.0 volts....................... ?? Has to be a very old servo. Go with something that can handle 6 volts or better

On the web site they do state that it has fully locking up & down positions for the servo.........O K.....As they state you MUST CAREFULLY adjust the servo arm hole / throw and the rod . ...........Click on their Resources Tab of the plane...

You now know how strong of a servo you will need. Enjoy

Rich
cyclops2 is offline Find More Posts by cyclops2
Last edited by cyclops2; Dec 28, 2012 at 06:27 PM.
Reply With Quote