Thread: Discussion New Eclipse 2.4 PRO?
View Single Post
Old Dec 23, 2012, 04:03 PM
A.T. is offline
Find More Posts by A.T.
Registered User
Joined Aug 2002
5,811 Posts
Quote:
Originally Posted by themiddleF View Post
Hi guys!
I have an eclipse 7pro, and I can't find the way, to program a switch. I have a 6ch and a 7ch optima reciever, and I would like to select a 3stand switch to setup my quadcopter:
-fail safe
-altitude hold
-manual flight mode modes.
My problem is, that i can't find the possibility to select the switch to this setup. All the channels are fix.. For exampe, the channel 5 is a switch with 2 stands, so I cant program all the three modes.
Is it possible, to change the switches on the tx for other channels?
I have to setup the modes in EPA in the dji naza program. Please help me, its very important to me. Thx a lot!
1. Set up model up under "Heli" rather than "Acro", this permits use of the three position Gyro switch as attached.
2. Under "Acro" a slider can be used, with some models,in lieu of a switch.
Min = Pos 1, Centre = Pos 2, End = Pos 3. (EPA may need to be extended to max)

Alan T.
Alan's Hobby, Model & RC FAQ Web Links
A.T. is offline Find More Posts by A.T.
Reply With Quote