Thread: Build Log K&A l39 build
View Single Post
Old Dec 23, 2012, 09:43 AM
BadLemon is offline
Find More Posts by BadLemon
Just having fun before I die!
BadLemon's Avatar
DeKalb,IL
Joined Dec 2008
950 Posts
Hi Juan

Looking at the picture it looks like the right side of the fuse is higher then the left side. Now this could be just an optical illusion but that is the way it looks to me. If so may be able to fix the vertical fin if yo pull down and align the fuse. But if not I have the same problem with an airworld Me-262 and did what Turbonut suggested and it fixed the problem. I made a jig out of foam to set the fuse in and strap it down. Then I heated both sides of the vertical stab and braced it and let the fiberglass cool. Note this worked for me but I was warned not to get the fiberglass to hot or it will buckle.Then I made a support brace for the v-stab and glued it in and had a cross section support that glued to the fuse.
BadLemon is offline Find More Posts by BadLemon
Reply With Quote