Originally Posted by HeliHaven
Nope. I mean 50% switch on and 50% switch off on a Futaba T10CAP Endpoint setting screen. The radio does not do negative endpoints on the screen for any endpoint settings. But the 'throws are of course a + and - value in the flesh so to speak.
See pic below.
Chan 7 (AUX 1) set to 50/50 works fine.
Chan 8 (AUX2) set to 25/75 and the servos jitter.
I haven't used a futaba radio, but if you'd program those values into a spektrum radio it would simply do nothing (both values are 50). On a spektrum radio you would need to set it to -50 and +50. Once I get my ORX v2 I will test this myself and give definite feedback.