Thread: Build Log AeroSky B60 Build
View Single Post
Old Dec 12, 2012, 09:23 PM
mray is offline
Find More Posts by mray
Registered User
USA, AZ, Buckeye
Joined Feb 2010
548 Posts
Quote:
Originally Posted by dahawk47 View Post
Does the NP version require twin 4s lipos? Mmmm. $400? That doesn't include everything you need. I know it's a big 1600mm plane but geez, By the time you get her flling outfitted, it will cost $600+ putting it in a category that would include the Barron 58, Shrike Aero Commander, etc. They do look different from the pics. Does the NP version have the intake air scoops under the cowls?
The $399.00 version includes everything but the radio and batteries. The nitroplanes version requires/suggests one 4S but a 3600mah 4S. The landing gear on the FLYFLY seems to be solid metal oleo whereas the Nitroplanes is thin wire metal.



From Hobby Peoples description which also mimics FLYFLY website for ARF:
Quote:
EPO foam construction. 63 inch wingspan. Includes 2 x 900kV brushless motors with 2 x 40A ESCs, 2 x 10x7 3-blade props, retracts, installed servos. REQUIRES Radio transmitter and receiver, 2 x 10x7 3-blade props, 2 x 2200mah 4S batteries with charger.
That combo is for a 14.8v 4S 4400 mah setup....which is likely required as the motors in the FLYFLY seem to be bigger-
mray is offline Find More Posts by mray
Reply With Quote