Originally Posted by BThirsk
First, the align tail boom mount is better than the HK one, but you need to sand off about .005" from the blocks and the nuts to reduce the size of the opening. It is a little too large to keep the boom tight. Test fit it before you install so you don't make it too small and crush the boom.
The align balls don't work with HK balls. The HK balls are about .003" bigger than the align balls which will cause the align ball links to be too tight. Resizing won't loosen up enough. You need to order the align ball kit.
The other biggest issue I had and a friend of mine also had was the swash plate bearing was loose causing a major lack of control. We both replaced with an align swash plate and the response was precise as it should be. Check for excessive play between the swash plate and the follower.
Excellent info, thank you!