View Single Post
Old Dec 11, 2012, 09:05 AM
Robert Pulse is offline
Find More Posts by Robert Pulse
Registered User
Robert Pulse's Avatar
Davenport, Iowa
Joined Apr 2007
1,530 Posts
towboat

I just ordered two M-tronics 30 amp speed controls for the towboat. Has anyone used the Rudder and Motor Mixer Control Unit available from harbor models and how well did it work? I have re-wired the flaps switch on my airtronics Vg600 so that it centers in the middle position and will move the flanking rudders from center to the left or right depending on the position of the switch (foreward or backward from center) It works good. I have used it on switches for sound effects and it works perfectly. I can adjust the amount of throw by adjusting the endpoint travel adjuster. Granted it is full left or full right depending on the adjustment but I can live with that for backing the tow Bob
It is at the bottom of this page
http://www.harbormodels.com/site08/m...d_controls.htm
Robert Pulse is offline Find More Posts by Robert Pulse
Reply With Quote