View Single Post
Old Dec 09, 2012, 09:18 PM
m_beeson is offline
Find More Posts by m_beeson
FPV junkie
m_beeson's Avatar
United States, UT
Joined Jan 2011
3,600 Posts
It is under 6V to the elogger, and now that I have processed it, I think that you want to stay under 6V on OSD also.

I remember bumping my osd power supply up to 6V, and things didn't work correctly, so when I brought it back down to 5.5V, then everything worked correctly.


Quote:
Originally Posted by johnfly1234 View Post
This is from this page: https://www.eagletreesystems.com/sup...als/osdpro.pdf
statment 1.=If the battery you are
connecting to the eLogger V4 is greater than 4S (about 16V), the throttle monitoring Y cable included with the Logger V4 needs to be connected
between the “Throttle” input of the eLogger V4 and any receiver channel (or a 5V to 6V BEC), to provide backup power to the eLogger V4. Note: the
voltage supplied to the throttle Y cable cannot be greater than 6V!

statment 2.= IMPORTANT: never connect receiver channels to the OSD Pro if your Receiver is powered
by more than 15 volts!

So........ is it 6volts or 15............ Seems like the more i read the more confused i get...
m_beeson is offline Find More Posts by m_beeson
Reply With Quote