View Single Post
Old Dec 09, 2012, 07:55 PM
Lmeano_from_MO is offline
Find More Posts by Lmeano_from_MO
Fast Jets for Fast times
Lmeano_from_MO's Avatar
St. Peters MO.
Joined Nov 2007
1,212 Posts
I completed the bench test of my CS12 blade 90mm I got from X-flight for this jet. My first test using the HK Red Brick 125amp ESC timing was set to a 30deg that provided 22.5V 95A 2137 Watt with a thrust of 6lb 3oz. I dropped the timing to 7deg and got 22.5V 91A 2047W at 6lb 1oz. I will leave it at the low timing so when I use a higher C rated I won’t over amp it. I got it assembled with only minor servo adjustments needed and the total weight is 8lbs with a 35C 4500MA 6s batt.

CS12 blade 90mm X Flight assembly (2 min 25 sec)
Lmeano_from_MO is offline Find More Posts by Lmeano_from_MO
Reply With Quote