Originally Posted by RCCrashTestDummy
Can you reccomend which settings to use from the slections below?
#1 BRAKE: (On) (Off)
#2 BATT TYPE: (Li-xx) (Ni-xx)
#3 CUTT OFF TYPE: (Soft-Cut) (Cut-Off)
#4 CUTT-OFF VOLTAGE: (Low) (Middle) (Hi)
#5 START MODE: (Normal) (Soft) (Very Soft)
#6 TIMING MODE: (Low) (Middle) (Hi)
#7 MUSIC: (D) (C) (B) (A)
#8 GOVENER MODE: (Off) (On)
This is why i will always opt for simonk firmware.
No need to rembember and worry about above settings