Originally Posted by lucky73129
all i want to do is just change the circuit board nothing else i want to get away from the 27 mhz and go to the 2.4 ghz i want to keep it 3 channel
Yeah you can do that, you'll just have an empty servo port on the 2.4 brick, and you might actually get a little more flight time, as you won't have that other servo sucking up the battery. Another thing you'll have to do is change out the plugs for the main/tail motors...both will be too big for the 2.4 brick. Sacrifice your "headlight" plug for the tail motor, and the tail motor plug will be swapped over to the main motor...hope your soldering skills are up to snuff...