View Single Post
Old Dec 08, 2012, 01:47 PM
ultimatetwo is offline
Find More Posts by ultimatetwo
Fly to live- Live to fly
ultimatetwo's Avatar
ROTA-CADIZ-SPAIN
Joined Jan 2008
1,255 Posts
Letīs go with the wing center section glassing...
We mixed a 50 per cent tinned with alcohol 24 hours epoxy and give a coat to the center section less over 1cm. or so near the trailing edge. We roll on a scrap balsa stick the cloth and glue with fine ciano on that 1cm. near the trailing edge.
Then we coat with a flat brush the balsa and lay the cloth over the epoxy, giving some tension so the cloth will be without warps.
After the cloth was placed, we let the epoxy curing during a couple of days or so and then cut we a sharp and new single edge blade the surpluss of the cloth so it will be flush with the plywood root ribs...
ultimatetwo is offline Find More Posts by ultimatetwo
Reply With Quote