View Single Post
Old Dec 07, 2012, 08:25 PM
Maxthrottle is offline
Find More Posts by Maxthrottle
You are a "go" for reentry
Maxthrottle's Avatar
High Orbit.....
Joined Jun 2009
7,987 Posts
Quote:
Originally Posted by av8ersteve View Post
How much elevator control throw? Manual doesn't say. Just from center to max up and down. What you guys use?
The manual doesn't say but shows it.

Pics have been posted so look in the attachment catalogue if you're interested. You don't want pitch up any further down as the LE tip of the stab could catch ground with deflection below the underside of the engine tubes (assuming that the lower strakes broke away. This is the same as the full scale.

The DR/Expo is per the manual and you adjust to your skill set. The one thing I posted was the servo linkage setup in the manual is for all out 3D, high on the servo arm which makes it sensitive for some. I'd suggest going mid on the servo arm and add expo if you are not used to it. I've watched 5 videos on youtube from 4 pilots that crashed on or shortly after take off from oversteer (Non posted here).
Maxthrottle is offline Find More Posts by Maxthrottle
Reply With Quote