View Single Post
Old Dec 07, 2012, 05:09 PM
jakestew is online now
Find More Posts by jakestew
Registered User
United States, ID
Joined Sep 2011
1,215 Posts
I'm liking the new forum so far! Great job starting this thread Ray!

I really like the BIT-Switch project, looks like we're already getting some great ideas here! The way the switch inputs are debounced I had always been thinking might work with a PWM signal also with a little tweaking. We could also integrate the PIC10F202 on our timer boards if I can't get the switches working well with PWM input.

I see the source isn't available for the BIT-Switch. It sure would be nice to be able to set multiple switch function ranges on the PWM channel. We still have one pin left on the 1840, so I'll see if I can't make that into a PWM pin that can operate the kill and table switches from a single RC channel.

This $10 RC switch controls 7 outputs from one RC channel...
http://www.hobbyking.com/hobbyking/s...f_Switch_.html

So I think it's not unreasonable to control a couple switches from a single pin on our 1840.


-Jake
jakestew is online now Find More Posts by jakestew
Reply With Quote