View Single Post
Old Dec 07, 2012, 12:02 PM
satinet is offline
Find More Posts by satinet
F3B
satinet's Avatar
Warwickshire, England
Joined Sep 2006
5,634 Posts
Quote:
Originally Posted by Flyextreme View Post
I want to jump in slightly off topic.

I'm setting up a 3M Viking2 with 4 x 6125 minis and 2 x 65Ks. Just wondering how much flight time your getting with the above mentioned 1500 pack? And how many/what MKS servos?

Thanks, Bill
Bill as a rough rule of thumb I find I usually consume about 300-500 mah per hour with a 3m/6 digi mouldie flying at the slope.

Obviously you can bring it up or down depending on what you do and what your setup is. That being said i don't find the type/brand of servo makes a massive difference. Flying style makes a difference - constant maxed out flying uses more obviously.

I don't think with nickel batteries you really want to go too far below half charge (IMHO).

Per the advice above I don't find f3b flying uses too much battery. Although there is really no need to have flat batteries if you are winching as you have lead 12v batteries and chargers on site all the time.

I agree that something in the order of 2 hours is reasonable. Assuming no binding servos and such!
satinet is offline Find More Posts by satinet
Reply With Quote