Thread: Question Need advice on g92 use
View Single Post
Old Dec 06, 2012, 08:46 PM
tr4252 is offline
Find More Posts by tr4252
Registered User
USA, NY, Syracuse
Joined Jul 2010
194 Posts
Thank you, Roto Rob.

I tried again, with a test that (I'd hoped) would cut two 1/2" squares side by side, with 1/4" between them. In the sample below, when I reached n050, the toolpath moved to the original X.5000, as if the g92 hadn't been there, and proceded to follow the path of the first part again back to the first origin point. Did I miss something in this simple example?

n000 g90
n005 g01 z-.050 f5
n010 x.5000
n015 y-.5000
n020 x0
n025 y0
n030 z.050
n035 x.7500
n040 g92
n045 z-.050
n050 x.5000
n055 y-.5000
n060 x0
n065 y0
n070 z.050

edit: Sorry it's compressed like this, in the window where I wrote this post all spaces were present; they seem to be deleted here.

Thank you,
tr4252 is offline Find More Posts by tr4252
Last edited by tr4252; Dec 06, 2012 at 08:51 PM.
Reply With Quote