Equalizing VRLA using multi4
Hello, I have the Revolectrix Cellpro Multi4 charger and I want to do an equalizing charge
to one of my 12V 24Ah VRLA (lead acid) batteries.
Instead of the standard 2.33V per cell, I want to use 2.5V for this special charge.
I loaded the library preset for 12V Lead acid battery, but when changing the Charge Voltage above 2.35V per cell I get the following in the Error tab:
"CELL DETECT MAX V should be >= CHARGE VOLTS + 50mV (2.405V)".
I cannot find where to set CELL DETECT MAX V so I can up the charge volts to the desired 2.5.
Using PC software version 2.19, charger has firmware V 1.67.