View Single Post
Old Dec 05, 2012, 04:43 AM
Isoprop is offline
Find More Posts by Isoprop
Registered User
Joined Nov 2010
2,865 Posts
Originally Posted by ginetto View Post
The Vimeo is still processing the video.. You can see this other video recorded with #11 version 2.

Here, I had the same problem but smaller.

I do not think it a problem of battery, because the noise (a brighter area on the right) became visible after 2 minutes and it increases for +1 hour.
Mtz also had this problem with his #16, albeit not nearly as bad.
A member on the #16 thread suggested the problem could be with the CMOS lens module overheating, which I believe is very logical, especially since we now know this problem also occurs with the #11 / #18.

The only other possibility is that light could be entering into the rear of the CMOS module. If the camera case is intact, and no LED is on during recording, I think we can rule out this possibility.

The only solution is to purchase a new lens module or add additional cooling. If the camera is new, I suggest you contact the seller for a replacement.

From what I have read in the #16 thread, the problem only seems to appear when the cameras record over a long period of time.
Isoprop is offline Find More Posts by Isoprop