Originally Posted by Balr14
This only occurs on idle up, not when you increase throttle in normal mode? Do you have to be providing other input, like ailerons or elevators as well, or does it occur with no input? I starting to think rate settings might be too high on idle up.
nope, i dont use idle up yet. on normal throttle mode is the problem. on throttle hold the gyros are working fine, also when the motor is disconnected gyros are working okay.
it occurs with no input on elevator, aileron or rudder. it is just messed up on throttle up past midstick
it's okay below midstick
and oh the esc easily goes hot, is this normal?