Thread: Discussion Dynam grand cruiser
View Single Post
Old Dec 04, 2012, 10:42 PM
Herman Munster is offline
Find More Posts by Herman Munster
Registered User
Herman Munster's Avatar
United States, Mt, Libby
Joined Nov 2007
1,446 Posts
Quote:
Originally Posted by dahawk47 View Post
Okay,

Back to testing. I've determined I'm dead in the water on the nose gear retract.. Conducted several different tests.

Have an esc hooked up to BL motor and futaba rx. Plugged into the channel 3 All good. Motor works. RX beeps.

Have another plane (scratchbuilt airliner) with servoless retracts. In fact, they are very similar to the Dynam retracts. 1) Directly plugged connector into rx. Works, no problem. 2) Plugged into different Y connector and then to rx. Works, no problem. Plugged into Dynam supplied Y connector. Works, no problem. So my other servoless retract works in a stand alone set-up

Tried again plugging C310 nose gear into Dynam Y connector. No go. Tried using other plane's Y connector. No go. Both Y connectors are good. Check

The mains work fine but the nose gear retract is dead on arrival. Not a budge, a grunt, groan. Nothing. Completely powerless.

I guess the next step is to contact Basil at Grayson

4th down...

Hawk
Is the nose gear mounted in the plane, and if so is it in the down position or retracted?
Herman Munster is offline Find More Posts by Herman Munster
Reply With Quote