Thread: New Product ESR / IR Meter fo Lipos
View Single Post
Old Dec 04, 2012, 03:34 PM
Wayne Giles is offline
Find More Posts by Wayne Giles
Registered User
Rugby, UK
Joined Feb 2007
1,010 Posts
Quote:
Originally Posted by DonA View Post
Wayne, if I make the single cell modification, can I use the single cell approach (seperate power supply) to check the IR Value of cells in a 10S configuration that only has one power plug. Works fine on 5S configurations, but a lot of pattern guys fly 10S with only one power plug instead of 2 5S in series.

Thanks
Don
Don,

You don't need to do the 1S modification to read the individual cell values of a 10 cell pack. You just need to make up a little adapter to connect the power leads via the balance connector.
Someone else asked the question way back and I gave the details further back in the thread. You can find it at :-
http://www.rcgroups.com/forums/showp...&postcount=198

Having just read it through, I'm not convinced it is entirely clear.
If it is not let me know and I will try to post a sketch to clarify it.

Wayne
Wayne Giles is offline Find More Posts by Wayne Giles
Reply With Quote