Thread: New Product Eflite Fiberglass EDF HABU Thread
View Single Post
Old Nov 30, 2012, 02:40 PM
Robert Belluomini is online now
Find More Posts by Robert Belluomini
EDF Jet Jam 2015, May 28-31st
Robert Belluomini's Avatar
United States, KY, Erlanger
Joined Dec 2000
7,479 Posts
Quote:
Originally Posted by Tealc View Post
I know...not a large weight savings. I was just thinking the cleaner setup would be nicer. One wire running from receiver out to all the servos instead of a bunch of wires that work their way back to the receiver. I am thinking of changing thing up simply because the cost of s-bus but it would take one of my small 3channel s-bus receivers and allow me to use up to 18channels or in the case of my radio 14 channels. Then I would not have to use any Y's. For now I do have an 8 channel receiver not being used. So, I will probably use that and go with all the extensions that I have currently. Ashlok connectors for the wings are in consideration, since I will have to remove wings for transporting. This was the main reason for considering S-bus. One wire going to each wing instead of three. The Ashlok connector would give me only one connection to plug and unplug for the wing. Anyway thanks for the input.
The etracts won't work on the S-Bus. Which Tx are you using?
Robert Belluomini is online now Find More Posts by Robert Belluomini
Reply With Quote