Thread: Discussion Modifications to my Wild Hawk
View Single Post
Old Nov 30, 2012, 07:06 AM
RWData is offline
Find More Posts by RWData
PowerTower
RWData's Avatar
United Kingdom, England, Bristol
Joined Aug 2009
1,096 Posts
Replacement motor & esc sounds like the place to start. If you are looking for more out of the model a hotter motor might help. I'm not familiar with the stock gear, so not sure what the TX/RX quality is like. If it has 4ch, you could consider cutting ailerons into the wing (or stick them on T/E), that's if you are up to flying 4ch. It's not really about 4ch anyway, since you could do away with rudder and do ailerons instead. I started with 4ch and didn't use the rudder until I had a few flights in the bag. If you want more out of the model, that's what I would consider doing, but wouldn't think there's much mileage in transplanting the TX/RX into another model unless it's scratch-build and money is really tight !
RWData is offline Find More Posts by RWData
Reply With Quote