View Single Post
Old Nov 29, 2012, 09:31 AM
archet is offline
Find More Posts by archet
Registered User
Mozambique, Maputo City, Maputo
Joined Sep 2012
38 Posts
Gimbal stabilization stopped working

Hi,
when I finished mounting my hexa with YS-X6 I played a little bit with roll and pitch stabilization to check its sensitivity, changed some parameter on the GCS and it was working. Then I didn't use it anymore because I was doing fly tests with many problems. Now when everything seems more or less under control I turned to stabilization and connected the pitch servo to the Ext2 port of FC and the C7 port of FC to the channel 7 of receiver.
With this configuration I had the pitch stabilization and through the channel 7 I was able to control manually the camera's pitch.
Now I don't get neither the stabilization nor the manual control. I checked the channel assignment on the radio to the correct knob, but it doesn't work.
What am I missing? Is there some parameter on the GCS to enable stabilization?
By the way, I am using channel 8 and channel 9 directly on the receiver to control zoom and shutter of a Sony hdr video camera trough a Lanc control, and that works fine.
Thanks
archet is offline Find More Posts by archet
Reply With Quote