Thread: Discussion Wing Wing Z-84
View Single Post
Old Nov 27, 2012, 05:05 PM
Kurt is offline
Find More Posts by Kurt
Upstanding Member
Kurt's Avatar
United States, TX, Houston
Joined Sep 2003
2,482 Posts
hi all,
I had a $30 credit on HK so just ordered a WingWing kit from their US warehouse.
Already have a few ESCs, 3S 1300mAh batts, 9g servos and an extra 4-ch RX so all I should need is a motor.

aeromaniac - you mentioned that you tried, or were thinking of trying a Radjet 800 motor. Did you ever do this?
I have a couple of stock 1850kV Radjet motors collecting dust (upgraded my radjet a bit with twin 2826 2200kV motors ) so would like to make use of one.
3S @ 1850 kV = 23000 rpm
you're running a 3000kV motor on 3S right? that would be ~38000 rpm.
I have a variety of 5x5, 6x4 and 6x5 props so could do some experimenting.

My Radjet and a EDF Stinger satisfy my need for speed, the Wing Wing would be for more relaxing flights in smaller spaces so not interested in balls to the wall top end speed.
Would like to get 5-6 minutes out of a 1300mAh pack. Any longer than that and the pilot needs a break...

thanks for posting all the tips/tricks in this thread, looking forward to a low maintenance, fun flier like the WW appears to be!
Kurt is offline Find More Posts by Kurt
Reply With Quote