View Single Post
Old Nov 25, 2012, 05:09 AM
OlliW is offline
Find More Posts by OlliW
OlliW
Joined Sep 2009
2,924 Posts
Support for various Programing Boxes

Hey Folks,

good news for those interested in using a programming box for in-field setting the parameters of the modded GA250.

I've just released the firmwares (and bootloaders) for also using the Turnigy DLux Programming Box (thanks Tomve for suggesting it ) and an Arduino Uno + LCD Shield. The new firm- and software package is called v20121125, please download here: http://www.olliw.eu/2011/ga250-gyro-firmware/#firmware
(the other firmwares/softwares were not changed, only new firmwares for the programming boxes)

Secondly, for those who wanted to use a Robbe Box but were outside Europe and couldn't find a supplier, I have identified some rebranded versions which, I guess, are also available in the US. Info I have compiled here: http://www.olliw.eu/2011/robbe-box-schaltung/#sources

A comment on the Turnigy DLux Box: apparently different versions with different internal hardware exist; I could identify boxes with the version number printed on the main board ending with -000 and -002. Unfortunately I could not yet decipher the scheme of boards with -002 completely, I'd appreciate much if anyone with additonal info or good photos of the board would share it with me. THX.

Cheers, Olli
OlliW is offline Find More Posts by OlliW
Reply With Quote