Thread: New Product Change Sun 10 blade 70mm
View Single Post
Old Nov 24, 2012, 03:51 PM
GooberRC is offline
Find More Posts by GooberRC
Registered User
United States, AZ, Gilbert
Joined Sep 2012
132 Posts
Calling all EDF experts, I need some assistance I am pretty much a complete noob when it comes to EDF setups and I need to decide on a configuration for an A-10 with an AUW of approx 6lbs (plus or minus, depending on the input received here of course). Here is the kit I need to power: http://www.nitroplanes.com/projet-004-a10-kit.html

I have been reading much of this thread and I would like to get the great sound provided by the CS10 units if they are a good match for my plane. I already have some 4S-3300 35C packs which I would prefer to re-use if possible. Would a couple of HET 2W-25 motors driving the CS10 fans be a good match for the A-10? If so, what kind of ESC would you recommend? Could I run two of my 3300 packs in parallel or would that get way too heavy?

I'd really appreciate your input as getting this wrong would be expensive! Btw, I would have a preference for speed vs thrust on this ship, but obviously it will need a decent amount of thrust to fly well. Thanks for the help!
GooberRC is offline Find More Posts by GooberRC
Reply With Quote