View Single Post
Old Nov 24, 2012, 03:42 PM
Dennis Frie is offline
Find More Posts by Dennis Frie
Just another user
Dennis Frie's Avatar
Denmark, Capital Region of Denmark, Naerum
Joined Feb 2011
1,368 Posts
Originally Posted by RickEis View Post

I'll experiment, and if that is the case, I'll yank the voltage divider from the schematic so as not to confuse folks that plan to use this particular sensor
So which current sensor are you using ?

You said above, "I currently have this hardware I'll look at when i feel like it
3-axis accelerometer and 3 axis gyro for artificial horizon
Pressure-sensor for thermal/altitude
Plug-in memory to log GPS-data, voltage, current etc"

I was glad to see you considering a pressure sensor, "when you feel like it" What pressure sensor do you have?

These gps units seem + or - several meters in elevation

I have already written a note on the schematic. The current-sensors I have used have always just had the battery-voltage as output and voltage-divider on the OSD. I use the current-sensors from Flytron. I tested the one from Allegro (the one you have shown too), but got better results with the one from Flytron.

The pressure-sensor is the classic BMP085
Dennis Frie is offline Find More Posts by Dennis Frie
Reply With Quote