Thread: Question Buying a used Apprentice 15e
View Single Post
Old Nov 23, 2012, 08:26 AM
bobly is offline
Find More Posts by bobly
Registered User
Joined Sep 2010
4,287 Posts
Except for initial binding of transmitter to receiver, always turn transmitter on first, then install battery in plane. If you disconnect the plane's battery and then reconnect it without turning off the transmitter in between disconnecting and reconnecting, the receiver will flash as it thinks it lost signal. So if you disconnect the plane battery, always turn off transmitter next. Then if you want to plug plane battery in again turn transmitter back on before doing so.
For initial binding the two, you plug battery in plane first and the receiver goes into bind mode, then turn on transmitter while holding the bind button or whatever it takes on that individual transmitter. After the transmitter and receiver are bound together ALWAYS turn transmitter on first plug in plane bettery second and to shut down always unplug plane battery first, then turn off transmitter.
bobly is offline Find More Posts by bobly
Reply With Quote