Thread: Discussion Rudder Question
View Single Post
Old Nov 21, 2012, 04:23 PM
OkiThumper is offline
Find More Posts by OkiThumper
Closed Account
Joined Feb 2006
433 Posts
I'm wondering if you simply mount a slightly recessed micro servo in the fuselage say at the top near the front tip of the rudder, run a direct music wire pushrod with "V" bend for adjustment would work. It would keep the pushrod reasonably short. You could slightly over-drill the pushrod horn, so there is a very slight amount of slop to eliminate binding. This may not be necessary since with a smaller diameter music wire would have some flex so it would twist slightly without binding. YMMV.
OkiThumper is offline Find More Posts by OkiThumper
Reply With Quote