View Single Post
Old Nov 21, 2012, 07:26 AM
Velociraptor73 is offline
Find More Posts by Velociraptor73
SMILE you're being recorded :)
Velociraptor73's Avatar
Joined Apr 2010
754 Posts
...I think I could use some advices for new Zinger propellers.
I have tried Zingers 9x4 on DJI F550 frame with original 2212 920KV motors, 2x 4S 3300mah and it were too close to overheating, even without any camera on AG550 at around 1000m (3280ft) from sea level and considering an average temperature of 30*C (86*F).
I would like to try the Zingers again as carbon props can be a bit dangerous.
I'm now with Sunnysky's 2216 800KV motors instead of DJI's and 30A Simon flashed ESCs.
I went for eCalc but they don't have Sunnysky's motors on list neither Zinger's on props options. I'm considering 9X4 again on Hexa-V and 9X5 pusher for bottom motors when on Y6 configuration, but would be nice to have some opinions before placing the order.

I don't have a scale but probably my final weight should be around 3.6kg (8pounds) when I have the Ag550, camera and FPV stuff onboard.
Velociraptor73 is offline Find More Posts by Velociraptor73
Last edited by Velociraptor73; Nov 21, 2012 at 08:01 AM.