Thread: Discussion UK FPV Thread
View Single Post
Old Nov 20, 2012, 07:05 PM
JaeDubbya is offline
Find More Posts by JaeDubbya
Just put it on the credit card
JaeDubbya's Avatar
United Kingdom, England, Milton Keynes
Joined Jun 2012
338 Posts
Quote:
Originally Posted by MikeTheCrash View Post
I don't know if you can change the frame length on the 9x before the firmware upgrade. Have to say that the whole point of the 9x is upgrading the firmware. Get a smartie parts board and the LED backlight from hk too. Fully awesome what you can do with it! But apart from ensuring you are in ppm mode I can't see why it wouldn't work. Can you test it on another radio?
I have fixed the fault. I think I was too tired last night to see the obvious! LOL
I found if I pushed the dragonlink mount down a bit more on the back of my 9x it works perfectly, so I hadn't pushed it in correctly. As I have modded my 9x slightly so I don't have that stupid plastic thing around the pins I can push the servo connectors down further. So I have made a small adjustment to my DL2 mount so I make a really good connection on the pins.
JaeDubbya is offline Find More Posts by JaeDubbya
Reply With Quote