Originally Posted by Shimmy
You are correct that we won't know until we see it. I see 2 problems from the start.
1) A hatch in the belly is going to get rubbed open on landings. I had a strip of tape on the belly before to reduce the wear on the foam. Now I will have to come up with a way to close the hatch.
2) Swaping out servos will be a bit harder working through the little hatch. I managed to bust a couple of servos on my last plane and re-gluing required some dexterity. I have to see if the little hatch makes it harder or easier.
Use a better quality metal gear servo and tape as normal. I'm betting you would never have to cut through the tape for access.