Originally Posted by torch1
Thanks sockrat .I'll try that. In the event it doesn't work ,what would you suggest for servo less retracts . Thanks again.
There are plenty of metal legs and servoless retracts on Hobbyking now. Just measure the stock leg length. (I've upgraded mine a year ago when there was barely anything). I suggest using 54g retract for the front (the biggest one they have) and 54g or smaller for the mains. You don't need rotating retracts if you attach the wheel on the mains inner side.
Then either glue a plywood all along the bay length and screw retract to it or glue a couple of wooden bricks on the sides and squeeze it in between.