Originally Posted by Adrnln Jnke
Hey guys, been reading through the forums a lot while my v200 is down.
I had a nasty crash a while back, I flew into the sun blinding myself then flying the bird directly into the pavement from about 20 ft up. Broke the battery frame and landing gear. While waiting for parts I decided I would try and repair that broken frame with super glue and some other stuff. The tape on the RX is worn and so it is now held on by lacing tape (fancy eletrical string). I was able to get the heli in air today but is VERY unstable. Acft wants to kinda flop around. I am at a loss here, I only had the bird for a few days before smashing it into the ground. Should I just wait till the new battery frame arrives and get new double sided tape for the RX before I try to troubleshoot? I dont know where to start.
Thanks for any advise
Get some Scotch 411 double sided tape. Home Depot, and Ace HW has it. The gyro is very sensitive to Vibration/Motion so you need to stick it in place.