Originally Posted by WarbirdFan66
I use the power25 in my jug, plus the 11" 4-blader which works nice, but even i got a few smal cracks in the motormount after a little while. If i were you i would not trust the standard mount to much with that kind of motor, you might better go for the aluminum mount instead.
Agreed! The aluminum mount from customRC.com rocks! I clipped, and broke a 12" prop on the runway,doing a high speed fly by(only down fall with a two blade) After landing safely, I inspected the motor, and mount before replacing the prop, and everything held strong! The motor was also fine due to the flex of the firewall.