Thread: Discussion HoverflyGIMBAL settings thread
View Single Post
Old Nov 20, 2012, 10:16 AM
jbdww is offline
Find More Posts by jbdww
3D Heli and Planes
jbdww's Avatar
United States, TX, Round Rock
Joined Nov 2009
296 Posts
We are using this gimbal.
http://tppacks.com/store/index.php?r...&product_id=55

A lot of guys are having lots of success with this gimbal. On my setup the belts are tight, I am using 6V to power the MKS BLS950 servos, the camera is well balanced on the gimbal. I am using the NEX5N with the 16mm Pancake lens that everyone else is using.

I changed the gains all the way down and I still get the jitters and you can see a huge lag in the movement. The scaling factor is dead on.

When I turn HFG off, the vido is solid smooth, so there is no vibrations from the props, and the gimbals vibration isolators are working great.

I am using V1.2 Rev2 with the latest firmware, so why is the PID gain button show up on the roll and pitch screens, and why does it seam like the graph is showing those access?
jbdww is offline Find More Posts by jbdww
Reply With Quote