Originally Posted by Stacky
Probably however remember that the quad has the esc's etc inside an enclosed space. I just did a flight with some 12 inch props on and the esc's were very hot after a 6 minute flight. There is no air circulation inside, i doubt you will get away with 10 minute flights in summer.
On my waterproof tricopter I installed aluminium heatsinks through the fuselage so that the fins stick outside and four screws plus silicone sealant make sure it's a watertight installation. Then I mounted the ESCs on the inside side of the heatsink. It works well, but I'm not sure how difficult it would be to do the same with this shells.