Thread: Discussion turnigy ntm 50/50 motor
View Single Post
Old Nov 20, 2012, 07:43 AM
jackerbes is offline
Find More Posts by jackerbes
Jack
USA, ME, Ellsworth
Joined May 2008
18,083 Posts
"..turnigy 5 cell 30/40c discharge.

apc e 15 x 10
1465 watts
83 amp draw..."

Those numbers would put a 5S pack at a cell voltage of about 3.53V, was that about right?

If so, and if you use a 5S pack that holds voltage better (3.8-4.0V under load), the input power will be quite a bit higher.

Jack
jackerbes is offline Find More Posts by jackerbes
Reply With Quote