Thread: Discussion RC OMG's Servo
View Single Post
Old Nov 20, 2012, 06:25 AM
aerografixs is offline
Find More Posts by aerografixs
Registered User
aerografixs's Avatar
Joined Nov 2002
98 Posts
Originally Posted by omgsales View Post
Wilhelm Husemeyer's test review in PDF format!
here is the translation

We were asked for a review of
To write OMG servos.
The contact to OMG is very good and the delivery of the servos is provided to us was
except for neatly and quickly.
The servos make a neat and very stable
Impression. Unfortunately, the servo arms are quite short and is also very sparingly supplied with.
The first servo installed by us:
Art. Nr. LDT050150C
Digital type
Bushing or bearing bearing
Operating voltage range 4, 8-6.0Volts DC
Storage type dual ball bearings
Speed (s / 60 @ 4.8V/6.0V) 0.18 / 0.16
Torque oz / in. (4.8V/6.0V) 194 / 208
Torque kg. / Cm. (4.8V/6.0V) 14/15
Size in inches 1.58 x 0.79 x 1.47
Size in mm 40.1 x 20.1 x 37.3
Weight 1.76 oz
Weight 50 g.
Engine of type Coreless motor
Control system + pulse width control 1500usec neutral
Required pulse 3-5 volts peak to place Wellenberg
Operating temperature range (o F) 14 - 122
Operating temperature range (℃)-10 - 50
No-load current of 5mA
No. load operating current (6.0V/7.4V) 110mA
Install current (6.0V/7.4V) 2800m / 3000mah
Dead zone width 2μs
Potentiometer type rotating (max. 220 )
Connectors cable length 11.8 in. / 300 mm.
Connection wire gauge AWG 25
Connection type JR
Gearbox type titanium gears
Wave 6 mm, 25T
To test this servo, we built
OMG Servo (0 min 43 sec)

This is a Hawaiian dragster in the scale 1/6
The installed servo works here very carefully. The long Anlenkweg no problem preparing the servo.
It is very sensitive, and very accurately. Unfortunately, we have not included here
Servo arm fitted by the size of the model because the wheelbase is 55 cm.
Our final opinion:
A high-quality product which represents an asset on the market.
I'm not old, I'm a classic
aerografixs is offline Find More Posts by aerografixs
Reply With Quote