Originally Posted by Mukenukem
I took out 2 screws of the gimbals, replaced them with custom M2.5 hex nuts. On 1 side I glued in 2 matching plastic screws which had the same thread like the original screws. On the backside I used the 2 screw holes of the antenna and used the 2 long screws from the gimbal.
The I-toy is fixed with some 3M dual lock tape. The only downside is that I need a screwdriver when I want to remove the I-toy mount. I think of using strong magnets to attach my mount.
I'd be concerned about the aluminum interferring with the RF.