Thread: Build Log Theresa Marie - SC&H 1:24 Brig
View Single Post
Old Nov 18, 2012, 08:03 AM
Jpop Andrew is offline
Find More Posts by Jpop Andrew
Registered User
Jpop Andrew's Avatar
United States, IN, Indianapolis
Joined Nov 2010
257 Posts
Week 12: Bowsprit, plans, 1st Naming

Bowsprit prep. For some reason it was a wee bit sad to take my Dremel and rattail file to the pristine bow to cut the groove for the bowsprit to rest in. After making piles of fiberglass dust, the deed was done. Adding the bowsprit will increase the length of the model by another 9 inches, but may help protect my figurehead(s) from damage in the shipyard. Now I just have to make sure my foster dogs don't cause some mayhem (aka "the dog ate my bowsprit!").

The instructions have you mount the bowsprit so it can be taken off for transport (or "decommissioned" in their words). So I need to decide whether to go that route or mount it more permanently.

Next I assembled the bowsprit bits and rest. For now I just temporarily positioned the bowsprit in place, but oh what a happy thing to see.

Forecastle plans. I'm leaning toward making an extended forecastle deck with two manned bow chasers oriented forward: the Theresa Marie's fangs. It will certainly make her look distinctive, especially with six or more figures manning the guns. I'm picturing the Theresa Maries and guns being in "pursuit in high seas" action stations.

So knightheads, catheads, anchors, fore course... all those details will need to be positioned around the bow chasers and figures. I'm also leaning toward making the forecastle railing thinner than the 1/2 inch bulwarks to allow a little more deck space.

First Honorary Naming. Meanwhile, 1925 miles away from my shipyard another person started building their own SC&H Brig kit at the same time I did: Tim Bowman. The Theresa Marie is hull #032 while his is #033. Tim is one awesome builder who uses a 3D graphics program and can custom produce plastic pieces.

After seeing the absolutely gorgeous cannons he's making for his HMS Scorpion (which will be firing real black powder cannons!) it was clear we had to name one of our ship's figures after our fellow builder: Tim "Panzerfaust " Bowman, Master Gunner of the Theresa Marie.

(And yes of course there will be a Lieutenant Dan and namesake for everyone here who has provided helpful advice. Just have to decide which will be which.)
Jpop Andrew is offline Find More Posts by Jpop Andrew
Reply With Quote