Thread: Discussion Club Twistaholic
View Single Post
Old Nov 17, 2012, 08:36 PM
David22 is offline
Find More Posts by David22
Suspended Account
North vancouver, B.C. Canada
Joined Apr 2008
19,406 Posts
Quote:
Originally Posted by brathanke View Post
Wow lots of discussion

David you can also reduce blowback by making sure your servos have as much leverage as possible. To do this you need to maximize the end points in your tx so the servos are moving as far as the tx will push them. Then move the pus rod into the closest hole to the center that gives you the desired throw. You should try this before getting stronger servos.
This was set up first before all tests were done
Only exception was servo hole was not first but second hole
For eleven it is like number five hole out on arm
So leverage is max more or less

This os electric motor on Wayne's video what is story with that motor
I hear it is good one but heavy on watts

Does os now make electric motors as well as fuel engines

Are os 30 motors same manufacturer as os engines

Are both made in Japan

David22 is offline Find More Posts by David22
Reply With Quote  (Disabled)