Thread: Question Turnigy 9XR
View Single Post
Old Nov 17, 2012, 03:52 PM
pe5ed is offline
Find More Posts by pe5ed
Registered User
Haarlem
Joined Aug 2009
9 Posts
Ola

Not sure whether in the right thread, ran through quite a few, and was completely baffled by all the information. So maybe can give a few pointers on where to go from here.

I purchased a second hand 9x (rev1) with a couple of tgy 9x8c (rev1) receivers.
As I understood changing the board itself from r1 to r2 is a relatively easy job. After which I will change to the opensource firmware, which is not a scare to me. My main concern is which DIY RF unit to buy. I guess the are quite a few options open. But which is to be recommended right now ?
FASST / DSM / DSM2 / ACCST
Are these 'standards' all incompatible ?
My modelling choices are soaring/dlg/electric, so I am in for a telemetry system with a thermaling aid, as top of the notch solution. No plans for FPV or Heli's

Or is my gut feeling of going for the FrSky module the only right choice in this ?

-- To my horror, I see this is my first posting, and that after lurking in for 3 years, shame on me.....
pe5ed is offline Find More Posts by pe5ed
Last edited by pe5ed; Nov 17, 2012 at 03:55 PM. Reason: addition
Reply With Quote